Results 1 to 2 of 2

Thread: Dyna supermeg heat shields

  1. #1
    texdgl Guest

    Default Dyna supermeg heat shields

    I just attempted to install a chrome Supermeg (828-71574) on my 08 FXDC The collector heat shield does not match up with the front and rear heat shields. The front heat shield extends past the rear heat shield about 1/4". I could live with a slight gap but the tab on the collector does not even reach the rear heat shield. I even removed the entire system, removed the hose clamps from the heat shields and still cannot make the shields line up any better. Due to the shields contoured to the head pipes there is no way to move the rear shield back any further of the front forward. Please help since my bike is down until I can resolve this issue. I called customer service but the promised return call has not happened.
    Last edited by texdgl; 09-15-2009 at 03:48 PM. Reason: correction

  2. #2
    bschultz Guest

    Default

    Contact our Customer Service Department between 8am-5pm EST for warranty claim assistance. You can also email us at;
    sales@supertrapp.com
    Last edited by bschultz; 10-13-2009 at 03:16 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •