Results 1 to 2 of 2

Thread: Fat shot discs

  1. #1
    roadglide man Guest

    Default Fat shot discs

    My question is on the tightness of the discs. I believe the torque is 25 inch lbs. Or slightly snug. Is that critical to the flow through the discs. Or is it just a concern to not over tighten and strip or damage the pipe. I tightened them in the correct sequence but I did not torque. I may have over tightened them? Would this affect the performace of the pipe? PS this is a 4" screamin eagle Fat shot. Thx.

  2. #2
    bschultz Guest


    We recommend 15 inch pounds with applied anti-sieze. Yes, if you did tighten them down to much the self made spacers could be compromised; however 25 inch pounds should not be an issue, the stainless steel construction is pretty tough.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts