Results 1 to 2 of 2

Thread: Titan mounting?

  1. #1
    BillG1 Guest

    Default Titan mounting?

    I have a 1999 Titan Gecko RM.
    It has the OEM 2:1 ST QC System, PN 878-71492.

    I've put 4500 miles on the unit, and the header has completely cracked at both tubes where they enter the collector.

    The mounting system for the muffler consists of a strap from the muffler that goes to a rubber bushing in the frame. This doesn't seem to work very well (obviously).

    Is there a mounting kit available that would support the muffler from the transmission?

    (BTW, I have a new header on order from the Service Dept. so I'd like to improve the mounting to avoid a repeat...)

    thanks for any help you can offer.
    bill

  2. #2

    Default

    Quote Originally Posted by BillG1 View Post
    I have a 1999 Titan Gecko RM.
    It has the OEM 2:1 ST QC System, PN 878-71492.

    I've put 4500 miles on the unit, and the header has completely cracked at both tubes where they enter the collector.

    The mounting system for the muffler consists of a strap from the muffler that goes to a rubber bushing in the frame. This doesn't seem to work very well (obviously).

    Is there a mounting kit available that would support the muffler from the transmission?

    (BTW, I have a new header on order from the Service Dept. so I'd like to improve the mounting to avoid a repeat...)

    thanks for any help you can offer.
    bill
    Hi Bill, before we go anywhere I would like you to give me a part # off of the head pipe. The part # 050-???? is stamped on the collector of the head pipe under the muffler inlet, so you will have to move the muffler out of the way. You mention that you have a new headpipe on order, who did you order it from?
    If you want please email me at hugger@supertrapp.com and I will continue to assist you! Thanks, Gerry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •