Results 1 to 2 of 2

Thread: Nm on the endcap.

  1. #1
    bmwberra Guest

    Default Nm on the endcap.

    How hard should i tighten the 6 bolts on the endcap on my 5"..(Nm)...?

  2. #2

    Default How to determine how tight screws should be

    Fifteen inch-pounds. Or, two more turns once the screw heads hit the discs. Then check after your first ride and make any adjustment. Note: It is very important that you liberally use an anti-seize lubricant on the screws that hold the discs onto the core.

    We have an FAQ section on our website that might help answer more of your questions too.

    Here's the link:
    http://www.supertrapp.com/resource/faqs.asp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •