Results 1 to 3 of 3

Thread: supermeg on tc88

  1. #1
    eglide Guest

    Default supermeg on tc88

    Sounds like this would be a great touring exhaust for my 04 electraglide. Anyone have any good base line starting points as far as # of discs and initial carb setup? Would a step up to a #46 pilot and perhaps a couple shims under main needle be a good starting point? I would install an open aircleaner to go along with the supermeg. Oem cams and pistons. Thanks in advance!
    Last edited by eglide; 06-28-2014 at 09:05 AM.

  2. #2
    bschultz Guest

    Default

    Before playing with the carb we suggest setting a base line with the disc assembly. Start tuning with 14-16 discs. If you decide you want to get into the carb for a little more performance you can always add disc if needed.

  3. #3
    eglide Guest

    Default

    Thank you for your reply. I will start with the suggested number of discs. Down the road I will possibly add cams during cam tensioner upgrade.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •