Results 1 to 10 of 11

Thread: Needing Replacement Parts For

Hybrid View

  1. #1
    Join Date
    Aug 2019
    Location
    young porn
    Posts
    0

    Default Needing Replacement Parts For

    I recently bought a Custom FXR. It's a Fat Guys Pro Street Frame with a V Twin Engine (Unsure what engine exactly) Numbers on the Engine look something like this AB04L****. I've found nothing so far. Previous owner said it was 1450CC Either HD or S&S Engine. I see no stamping of S&S on it. The carb is a S&S Shorty G.

    The exhaust on it is a Supertrapp. 2:1 Mega (I believe). Numbers on the tail pipe are 027-7144. Heat shield numbers are 051-7147 & 051-7091. I'm missing the end shield. Cannot seem to find the header Pipe numbers. But here's a photo of it.

    I need to find replacement brackets for this exhaust. The bracket this goes in the location of the white box is broken it needs to be replaced. I also need to find a bracket that holds the tail pipe located in the red box. It's missing and the tail pipe looks like it's ready to accept something there for support (See photo D) below. The heat shield that is located in the white box above is the heat shield that is missing as well. I need to replace it.

    Broken bracket.


    Photo D



    Also something looks missing here. End cap possibly? If so I need to find a suitable cap for my set up.


    I'm ready to order these parts if I could locate them. Any help is appreciated.
    Last edited by satxv; 07-25-2012 at 12:44 PM. Reason: Corrected Rear Header Pipe Heat Shield Number

  2. #2
    bschultz Guest

    Default

    The collector heatshield will be P/N 051-7143.
    Looks like you will need a disc assembly (discs, end-cap & screws) and possibly a core if you are unable to remove the screws broken off in the IBC.
    The P/N's given are used in several of our 2:1 systems.
    The bracket remnants shown in the picture does NOT look like one of our designs. Do you have the rest of the bracket?
    The headpipe part number could narrow down a possible bracket. The P/N is stamped on the end of the collector (may need to loosen clamp and move muffler/megaphone back).

  3. #3
    Join Date
    Aug 2019
    Location
    young porn
    Posts
    0

    Default

    I appreciate your quick reply. I will be ordering the collector heatshield and the disc assembly if I am able to remove the screws from the IBC. I pulled the muffler/megaphone and see nothing stamped on the end of the collector YET. I checked only the top side of the collector end through scratches and scarrings from the muffler/megaphone being installed and removed. Didn't see anything on the top of the pipe. I'll check bottom of header pipe today. As for the bracket remnants shown above, it's all I have to go with. The PO has no idea what happened to it. I'm guessing it was dropped at one time. BUT while I was browsing through your downloadable 2012 catalog, I came across the Chrome Kerker 2:1SuperMeg located on the bottom left of page 25 that shows a bracket that looks promising. Is it possible (if I can't find the p/n for the header pipe) this could be a Kerker header pipe with Supertrapp muffler and heat shields? Regarding the muffler. It looks like it will accept a bracket or bolting to support to the frame by the rear tire. Is there a p/n for this "attachment" or size and length of bolt?

  4. #4
    bschultz Guest

    Default

    The P/N off the REAR headpipe heatshield (stamped on back) may narrow down the search.

  5. #5
    Join Date
    Aug 2019
    Location
    young porn
    Posts
    0

    Default

    That number (Rear Headpipe Shield) would be 051-7091.

  6. #6
    bschultz Guest

    Default

    Sorry...you provided that earlier and I had already looked at that, still several systems use the muffler body and heatshields. With out the headpipe P/N we would be guessing.

    Your best bet is the bracket out of the a Softail/Dyna system 828-71454...P/N 029-7145

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •