Results 1 to 6 of 6

Thread: Another Question about Kerker Exhaust part number

  1. #1
    Join Date
    Aug 2019
    Location
    Cook Islands
    Posts
    0

    Default Another Question about Kerker Exhaust part number

    I have a set of Kerker exhaust/mufflers 2:1:2 crossover system that I bought used. I do not have any mounting brackets to mount them to my 96 FLSTC and trying to locate some. The only part number I could find came from the crossover pipe with the numbers 050-7281. Any information is deeply appreciated.

  2. #2
    bschultz Guest

    Default

    The referenced headpipe, P/N 050-7281, was used in several '86-96 Softail systems (including a HD Screaming Eagle pipe), most discontinued. This headpipe is still used in system P/N 128-78082 and instructions can be see via PDF at the website.
    For a hardware kit, which includes support tubes (mounting brackets) contact our Customer Service Department.

  3. #3
    Join Date
    Aug 2019
    Location
    Cook Islands
    Posts
    0

    Default

    Thank so much, now I know where to find what I need to put them on.

    Where can I find the PDF? I just can't find it on the page.
    Last edited by BoLarry; 06-18-2012 at 11:55 AM. Reason: added question

  4. #4
    bschultz Guest

    Default

    Click on the red part number on the Kerker "slip-on/system" page.

  5. #5
    Join Date
    Aug 2019
    Location
    Cook Islands
    Posts
    0

    Default

    Quote Originally Posted by bschultz View Post
    The referenced headpipe, P/N 050-7281, was used in several '86-96 Softail systems (including a HD Screaming Eagle pipe), most discontinued. This headpipe is still used in system P/N 128-78082 and instructions can be see via PDF at the website.
    For a hardware kit, which includes support tubes (mounting brackets) contact our Customer Service Department.


    My mufflers turned out to be hollowed Kerker Cans, can you lead me to a set of good baffles with tone? My information is in the qoute above. The length of the m8uffler is 20" and Diam. of 3.5" with 3 bolt pattern.
    Last edited by BoLarry; 06-30-2012 at 02:31 PM. Reason: Added info

  6. #6
    bschultz Guest

    Default

    The replacement core assembley is P/N 100-7081 (includes packing).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •