Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Honda XL600

  1. #1
    Join Date
    Jul 2019
    Location
    Dominican Republic
    Posts
    0

    Default Honda XL600

    Hi everybody,
    I need to replace the exhaust, and sounds great the versatility of these little rings inside. Ive no idea of wich one would fit better, but i love the way DIRT ones looks. Specially the black one (universal 3M...).
    1987. 600cc. monocilinder.
    Ill appreciate ANY suggestion.
    Youve got at least one friend in Spain. Thanks.
    J.p.

  2. #2
    bschultz Guest

    Default

    The 3M DirtBike is one option for the XL600. The 4" Aluminum Racing and IDS2 Series Universals are also good choices.

  3. #3
    Join Date
    Jul 2019
    Location
    Dominican Republic
    Posts
    0

    Default

    I'll get one of those.
    Do you know any significant tech difference between them?, or it's just a matter of aesthetics.

  4. #4
    Join Date
    Jul 2019
    Location
    Dominican Republic
    Posts
    0

    Default

    I forgot to say THANKS A LOT.

  5. #5
    bschultz Guest

    Default

    The 3M DirtBike is our simplest, least expensive Universal muffler alternative. The 4" Aluminum Racing and IDS2 Series bodies are made of aluminum and construction is still relatively simple yet more substantial/complex then the 3M unit.

  6. #6
    Join Date
    Jul 2019
    Location
    Dominican Republic
    Posts
    0

    Default

    Hello again,
    Getting closer, 3m is disregarded.
    Aluminum racing series systems or universal aluminum racing series slips on, that is the question.
    If i get one of those , do i need any extra pieces to mount it?
    Is there any dealer in europe?.
    Thanks in advance.

  7. #7
    bschultz Guest

    Default

    Model specific Systems or slip-on applications come complete and ready to bolt up. Applications for the '87 XL600's were discontinued in '02 and are no longer available.

    The Aluminum Universals come with a 2 piece tri-bracket for you to bend and weld to the body for a custom fit. A connector pipe may also be needed.

    Check with our European Distributor for a dealer near you;

    www.partseurope.eu

  8. #8
    Join Date
    Jul 2019
    Location
    Dominican Republic
    Posts
    0

    Default

    Ok master,
    It'l be the universal 4'' brushed aluminum plus the connector pipe.
    Now i've got two 'problems'...
    My poor english, and my almost lackness of mechanical knoweledge. Would you please write down the exact 'part number' of them for me?
    I'm gonna get it trough the web, and don't want to loose my time and yours with silly mistakes.
    Last thing: As far as my engine is red, is it possible to get the closed end cap in red?.
    Thank you.

  9. #9
    Join Date
    Jul 2019
    Location
    Dominican Republic
    Posts
    0

    Default

    Thanks for all.
    412-17000 with 406-348 at the back... !

    Needed a connector pipe?.
    I can't find that on the catalogue, my exhaust pipe is 40mm wide.

  10. #10
    bschultz Guest

    Default

    The connector pipe is up to you, your local motorcycle or muffler shop should be able to assist you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •