Page 6 of 6 FirstFirst ... 456
Results 51 to 53 of 53

Thread: SuperTrapp slip on's for 2007 FXDL

  1. #51
    Join Date
    Jul 2019
    Location
    Bradford ON., Canada
    Posts
    0

    Default

    bschultz Can I use threaded 8/32 stainless steel rod as the 2 inch long 8/32 screws seem a little short when it comes to using 24 discs? I now have 22 and the ingagement is about a 1/4 inch or so. There is only like 1/8 of an inch to ingage into the threads in the baffle if I use the 24 and I would like the full thread which is close to a 1/4 inch it looks to be in the baffles. Where I get the 2 inch screws that is the longest they can get with out ordering a min., of 100 at a time. bschultz what do you think and thanks for your time? All ride safe now eh.
    Last edited by FXDL; 07-31-2012 at 06:51 AM.

  2. #52
    bschultz Guest

    Default

    The steel rod/nut combination seems like an alternative. Have you considered removing the disc assembly completly and running the core wide open?

  3. #53
    Join Date
    Jul 2019
    Location
    Bradford ON., Canada
    Posts
    0

    Default

    So remove all the discs and only run with the baffles in and the end caps on? That will be pretty loud, wright? I have just tried with the end cap off idling and it sounds diff., and much louder. Thanks again bschultz.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •