Results 1 to 6 of 6

Thread: SuperTrapp 2:1 SuperMegs Dimension

  1. #1
    93Horse Guest

    Default SuperTrapp 2:1 SuperMegs Dimension

    Interested in marring a SuperMeg to a set of Thunderheader head pipes and was wondering what are the overall dimension of a SuperMeg.

    Bike is a 93 FLHTP, Thunderheader has two inch collector and the distance from the inlet side of the Thunderheader muffler to the center of the end mount is approx 26.5 inches.

    Thanks

  2. #2
    bschultz Guest

    Default

    The 2:1 SuperTrapp SuperMeg headpipe is equipped with a 2.5" collector.

  3. #3
    93Horse Guest

    Default

    Thanks bschultz,,,,,,

    Look like I will go with the complete Super Trapp 2 into 1

  4. #4
    93Horse Guest

    Default

    OK I make a mistake. The collector on the TH is 2.5" and not 2" as in my original post, sorry.

    Can you tell me the overall length of the SuperMeg from the inlet to the center of the mounting bracket (bagger installation)? TH is approx 26.5"

  5. #5
    bschultz Guest

    Default

    13.5" from the inlet to the center of the first/front mounting bracket hole.

  6. #6
    93Horse Guest

    Default

    Thanks bschultz

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •