Results 1 to 2 of 2

Thread: Nightstick Removal

  1. #1
    Join Date
    Oct 2014
    Posts
    0

    Default Nightstick Removal

    I purchased and installed a Nightstick for my 2010 RG; I have also intalled the Stage 1 Kit and had the bike re-mapped at 1000mi.

    My question is that I also own a 2003 Fat Boy with a similar set-up except that I installed the 2:1 exhaust system and would like the RG to sound "similar". I understand that the RG has a cat and the sound will not be exactly the same and I am cool with that. Bought the open end cap per the dealers instructions, but what is up with the allen bolt with the center peg? How do I get this out - along with the retainers (fasteners) at the bottom of the pipe?

    Also, will I need to re-map following the install? Suggested number of plates, please.

    Thanks

  2. #2
    bschultz Guest

    Default

    It's a security head screw and most tool suppliers (Snap-On, Matco, CraftsMan) will have the wrench/attachment for removal.
    A re-map should not be needed; however I would follow your dealers recommendations. The 4" open end cap flows for 10-12 discs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •