Results 1 to 3 of 3

Thread: Supermeg Vs Nightstick

  1. #1
    lerock Guest

    Default Supermeg Vs Nightstick

    Had a '05 e-glide, 95", 204 cams, SE Air Cleaner, 2-1 Supermeg, ran with 20 disks closed end & was happy with tourq vs hp. Now have '10 Super Glide, 96", SE air Cleaner, single nightstick with stock headpipe. Should I be able to start w 20 disks also, or would that be too aggressive.

    Also, can you suggest a part # for fiberglass wrap for this core?

    Thanks,

    Mike
    Last edited by lerock; 07-25-2010 at 11:28 AM.

  2. #2
    bschultz Guest

    Default

    20 discs isn't to aggressive; however is it needed? On the 2:1 you were feeding 1.75" primaries into a 2.5" collector and core assembly. The 2.0" core in the NightStick is fed by a 1.75" pipe out of the OEM collector.

    The 4" Repack kit, P/N 400-4020 will work...you'll need two.

  3. #3
    lerock Guest

    Default

    Quote Originally Posted by bschultz View Post
    20 discs isn't to aggressive; however is it needed? On the 2:1 you were feeding 1.75" primaries into a 2.5" collector and core assembly. The 2.0" core in the NightStick is fed by a 1.75" pipe out of the OEM collector.

    The 4" Repack kit, P/N 400-4020 will work...you'll need two.
    Thanks, did not know that. That's why your the Gu-rue Can't do the math though cuz I don't know the flow rate of each disk. Could you suggest a starting place? Area diff says around 16, though pressure in the 2" should be higher.
    Thanks,

    Mike
    Last edited by lerock; 07-26-2010 at 12:16 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •