Search:

Bob,
Can you recommend a clamp part number for the pipe and I can make the flat bracket that goes to the mounting point. Just need P-clamp that is able to connect to a bracket.
Mike

Bob,

Appreciate it.

The P-Clamp is a guess. Do you know if any type of mounting bracket was supplied by Supertrapp as we usually get with normal OEM systems like my Wide Glide?

Would you...

Bob,
Found a complete ST Confederate system from a friend. Need a mounting clamp, looks like a P-Clamp that is around 3" from mid-point of pipe and the mounting point bolt. Did you supply these...

just to double check, my header is 2 1/4" at the slipon.

Bob,
I have the header, would you still have the megaphone slipon that would be close? Just want to get rid of that Muzzy slipon.
Mike

Which Supertrapp universal system was used on the Confederates (GT and Hellcat). Purchasing a used Confederate and they have a Muzzy system put on, but I perfer the Supertrapp system that was put on...

What is the equivalent number of discs going from 10 discs/open end cap to a "closed end cap system" that I will be able to keep the same FI tuning map for a 12 FXDWG 103. My current FI map is for...

appreciate it, great forum and great technical support

Bob,
Waiting on my TTS Mastertune fueler to come in, but want to ride in the meantime. Refresh my memory, what is the number of discs to use with stock air cleaner and no fueler (yet). Put 6 in at...

Thinking about having my VRSCX VROD V5 (528-71134) jet hot ceramic coated. I have used them before on other pipes including previous ST pipes (Confederate GT) with great results, but never on one I...

Just installed a TTS-Mastertune FI system on my 09 FatBob with a 2:1 Supermeg and SE aircleaner. Great results and powerband. One good thing about this system is its ability to create a great map...

Jeff,
I would think the factory system would have a lot more problems without this additional support due to the excessive weight of the factory systems verses the much lighter Supertrapp system. ...

Bob,
Installing my 2:1 supermeg 827-71574 and it calls for installation using the P-clamp under the timing cover. My factory pipes on my FXDF fat Bob does not have this P-Clamp. What do I...

Bob,

This is the exact same engine in the Fat Bob as the Street Glide, if I use the same 2:1 pipe and setup, wouldn't the same map apply or be close? It looks like the length of the head pipes...

How many discs can I run "without" having to add a fuel management system such as a Supertuner for a 09 FXDF Fat Bob with factory aircleaner? How many discs if I did the stage I flash and K&N...

Bob,

Can you tell me what I need to install a V5 system on a 08 Night Rod Special? Talked to you awhile back, but can't find the info you gave me

Mike

Bob,

What is the air/fuel ratio HD is using without enrichment? Does it change with addition of the FatShots?

thanks again

Bob,
Decided to pull the K&N and put the stock filter back in until I decide what to do to enhance the Fat Shots - SERT or PCIII.

I saw the dyno sheet you posted with the HP numbers on the Fat...

Bob,

Reading the various threads, your recommendations state to use eight (8) discs with a stock air cleaner and no airbox mods. Typically, everyone first changes the air filter to a freer...

I have a local tuner that is extremely good with SERT and PC maps, this tuner actually trains nearby HD dealers in optimizing SERT mapping. I am going to go with the SERTvG instead of waiting 60...

Post available fuel injection maps (PC, SERT,....) available using Supertrapp products

Have a 2007 FLHX Street Glide, stock other than a Stage I map, Doherty air cleaner kit and 2:1 SuperMeg. Just purchased SuperMeg, but have yet to put it on. Ordered a Race Tuner, but just found out...