Search:

Type: Posts; User: schultz

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Replies
    6
    Views
    4,614

    Shouldn't need to, however adding discs will lean...

    Shouldn't need to, however adding discs will lean the tune you have now. Keep an eye out for decel popping or a major drop in "low end" torque.
  2. Replies
    5
    Views
    4,648

    Your suggestion has been passed on to R & D and...

    Your suggestion has been passed on to R & D and the Sales Departments.
  3. Replies
    6
    Views
    4,614

    Try adding a couple discs at a time to provide...

    Try adding a couple discs at a time to provide more "top end" flow.
    Or go with the "open" end-cap keeping in mind it flows equivalent of 10-12 discs.
  4. 1; P/N 828-71580, 2:1 ST SYST, HD FLH/FLT...

    1;
    P/N 828-71580, 2:1 ST SYST, HD FLH/FLT '10-15, CHRM (12MM bungs)

    P/N 828-71578, 2:1 ST SYST, HD FLH/FLT '09, CHRM (18MM bungs)
    2;
    NO
    3; You are correct.
  5. Thread: End cap bolts

    by schultz
    Replies
    2
    Views
    4,308

    4" disc screws are 10-24 threads.

    4" disc screws are 10-24 threads.
  6. Replies
    1
    Views
    3,893

    if loosening the T-Bolt clamp at the headpipe...

    if loosening the T-Bolt clamp at the headpipe collector and muffler inlet and removing the bolts attaching the bracket doesn't do it, you will most likely need to remove the whole system from the...
  7. Replies
    1
    Views
    4,745

    I would try swapping the clamps from side to side...

    I would try swapping the clamps from side to side and see if the issue repeats itself on the other side. If that doesn't resolve the issue try swapping muffler bodies. The swaps should point to the...
  8. Replies
    3
    Views
    3,687

    Sounds like you needed the extra flow of the open...

    Sounds like you needed the extra flow of the open end cap. Stainless steel turns a gold color when exposed to heat. Gap between discs should be .023".
  9. Replies
    3
    Views
    3,687

    All chrome begins to discolor between 800-900...

    All chrome begins to discolor between 800-900 degrees Fahrenheit. Running HOT is usually associated with a lean running condition, however an overly rich condition can cause an incomplete fuel burn...
  10. Replies
    2
    Views
    3,063

    The Performance of the OEM pipe falls in between...

    The Performance of the OEM pipe falls in between the "True Duals" and a true 2:1 "Performance pipe" which will likely be noticed more with riding two up. Regaining bottom end torque via the reduction...
  11. If you prefer more sound you could utilize 10-12...

    If you prefer more sound you could utilize 10-12 discs + an "open" end-cap.
  12. When you say the "internal baffle removed", does...

    When you say the "internal baffle removed", does that mean when the discs are off the unit you can run a broom handle all the way to the inlet (header collector)? If so, yes 20 discs would be a good...
  13. Replies
    1
    Views
    2,261

    Your symptoms indicate to few discs (not enough...

    Your symptoms indicate to few discs (not enough exhaust flow)...except for the plug burn.
    You could go with an "open" end-cap, which would also provide more sound, or you could pick up a 6 or 12...
  14. Replies
    1
    Views
    2,541

    The SE's are equipped with NON-serviceable cores...

    The SE's are equipped with NON-serviceable cores out of the factory.
  15. Replies
    1
    Views
    3,674

    Contact our Customer Service Department during...

    Contact our Customer Service Department during normal business hours (w/P/N) for assistance.
  16. Replies
    13
    Views
    10,660

    Yes. Adding discs will provide more exhaust flow.

    Yes.
    Adding discs will provide more exhaust flow.
  17. Replies
    13
    Views
    10,660

    Excessive exhaust residue is usually an...

    Excessive exhaust residue is usually an indication you may be running a little rich. You may want to consider adding 2-3 discs for more exhaust flow.
  18. Replies
    7
    Views
    6,369

    Yes, plus you'll reach a point where (by adding...

    Yes, plus you'll reach a point where (by adding discs and/or removing the disc assembly completely) the catalyst in the headpipe will become the restrictive factor in your exhaust system.
  19. Replies
    7
    Views
    6,369

    P/N 404-7881, includes; 10 discs open end-cap...

    P/N 404-7881, includes;
    10 discs
    open end-cap
    6 pack 2.5" screws
    2cc hi-temp lube (anti-seize)
    security hex key

    Keep in mind the catalyst in the OEM (stock) headpipe soaks up a tremendous...
  20. Replies
    7
    Views
    6,369

    Tune Kit, P/N 404-7881...can be used; however may...

    Tune Kit, P/N 404-7881...can be used; however may be a little overkill on the 750.

    What are you trying to accomplish?
  21. Replies
    7
    Views
    6,369

    Can you provide the HD Screaming Eagle part...

    Can you provide the HD Screaming Eagle part number?
    These should be 4" discs.
  22. Your assessment sounds correct and the 5/8"...

    Your assessment sounds correct and the 5/8" should work well with the single 6-piston caliper.
  23. Replies
    3
    Views
    3,431

    That would be a good way to approach it.

    That would be a good way to approach it.
  24. Replies
    3
    Views
    3,431

    3-4 db's on the first question. Either/or on...

    3-4 db's on the first question.

    Either/or on the second.

    If the core assembly and disc assembly w/end cap were installed you could add 3-6 discs during tuning.

    Just don't get caught up in...
  25. Thread: dyno.

    by schultz
    Replies
    2
    Views
    2,972

    The open end cap is equal to 10-12 discs vs. the...

    The open end cap is equal to 10-12 discs vs. the closed.
Results 1 to 25 of 27
Page 1 of 2 1 2