PDA

View Full Version : 2:1 heat shield alignment



kruser
09-10-2009, 10:22 PM
I just installed a Supermeg 2:1 on my '08 Street Glide and everything went well except I cant seem to get the rear heat shield to butt up to the collector shield. There is about a 1/16" gap whereas the front shield mates up perfectly. It's not a huge deal but wondering if there is a way to get both lined up cleanly?

Thanks.

http://i296.photobucket.com/albums/mm168/aamittle/DSC_0011.jpg

bschultz
09-11-2009, 07:26 AM
Contact our Customer Service Department during business hours, 8am-5pm, Mon-Fri.

cybermunster
02-23-2010, 08:16 PM
Interesting, I have the exact same problem on my '08 ElectraGlide, front cylinder shield fits ok but the rear cylinder shield will not fit/sit flush at the collector ...mmmm

jimmie
02-12-2013, 01:12 PM
I have the opposite issue. My rear is flush but the front has a gap

bschultz
02-13-2013, 01:30 PM
Gentlemen, if you have issues please contact Customer Service and we will do our best to resolve them.