PDA

View Full Version : V-5 2:1 System Help



Old Bill
05-18-2009, 06:43 PM
Super Trapp,

I have a 2006 Harley Davidson Screamin' Eagle V-Rod which I bought used with a Super Trapp V-5 exhaust already installed.

I'm trying to install 6 more discs but cannot remove the six bolts holding the discs in the muffler. I do not know if anti-seize was used during initial install but I think I'll break the bolts as they are.

Any advice is appreciated.

Old Bill

jwells
05-19-2009, 10:17 AM
If you remove the muffler from the bike, there is a set/locking screw on the side of the muffler body. Remove the screw, using a broom handle or wooden dowel you can gently tap the entire core out from the inlet end. Once removed you can access the backside of the screws and use some penetrating oil to get them out.
Otherwise, take a chance, if they break, you'll have to remove the core anyways.