View Full Version : Nm on the endcap.

02-08-2009, 04:32 AM
How hard should i tighten the 6 bolts on the endcap on my 5"..(Nm)...?

02-09-2009, 08:18 AM
Fifteen inch-pounds. Or, two more turns once the screw heads hit the discs. Then check after your first ride and make any adjustment. Note: It is very important that you liberally use an anti-seize lubricant on the screws that hold the discs onto the core.

We have an FAQ section on our website that might help answer more of your questions too.

Here's the link: