PDA

View Full Version : 06 FLHTPI Suggestions



NCCopBikeRider
09-20-2007, 01:09 PM
We have a 06 Cop Glide that had been lightly modified for this riding season.

K & N 3009 Air Filter

FullSac True Dual Left Side Conversion

PCIII USB (Waiting to be installed)

Next riding season's plans call for upgrading from 88 CI to 93 or 103 CI

We are looking for a pair of pipes to enhance the torque capabilities of the current 88 CI and also be used on the larger bike (if possible)

Maximum HP is not the goal, but good torque production is.

Your input is greatly appreciated.

Thanks for the great products. We have run Supertrap on Dirt Bikes, Road Race and Street Mustangs with great success.

hugger
09-21-2007, 08:05 AM
We have a 06 Cop Glide that had been lightly modified for this riding season.

K & N 3009 Air Filter

FullSac True Dual Left Side Conversion

PCIII USB (Waiting to be installed)

Next riding season's plans call for upgrading from 88 CI to 93 or 103 CI

We are looking for a pair of pipes to enhance the torque capabilities of the current 88 CI and also be used on the larger bike (if possible)

Maximum HP is not the goal, but good torque production is.

Your input is greatly appreciated.

Thanks for the great products. We have run Supertrap on Dirt Bikes, Road Race and Street Mustangs with great success.

Thanks for your interest in SuperTrapps and for using them in the past!

Your best option is to use the SuperTrapp SuperMeg 2:1 system, because of it's tuneability you will be able to tune it to the present setup and then just add discs for the new engine next season. The # of discs you use will determine where your power is going to be so you will be able to tune it for maximum torque.

I will email you some additional tuning information and if you have additional questions you can email me directly or come back to the forum.

hugger
09-21-2007, 08:24 AM
We have a 06 Cop Glide that had been lightly modified for this riding season.

K & N 3009 Air Filter

FullSac True Dual Left Side Conversion

PCIII USB (Waiting to be installed)

Next riding season's plans call for upgrading from 88 CI to 93 or 103 CI

We are looking for a pair of pipes to enhance the torque capabilities of the current 88 CI and also be used on the larger bike (if possible)

Maximum HP is not the goal, but good torque production is.

Your input is greatly appreciated.

Thanks for the great products. We have run Supertrap on Dirt Bikes, Road Race and Street Mustangs with great success.

Please email me so that I can send you the additional information.
hugger@supertrapp.com