PDA

View Full Version : Baffles for '94 Road King



dxjanis
05-28-2008, 04:36 PM
My '94 Road King stock mufflers have been gutted by a previous owner. The mufflers are 3" inside diameter and are cosmetically OK so replacing the entire system is out. Can you help me find baffles to fit the mufflers I have? I've been told the mufflers were made for H-D by Kerker. Thanks for any help.

bschultz
05-29-2008, 07:07 AM
SuperTrapp did make several model exhausts for Harley Davidson over the years; however not all. The inside diameter of our slip-on bodies are more like 3.375". If they are a SuperTrapp or Kerker based unit you will find a component part number stamped in one of two places on the muffler body. On the back of a welded on bracket or on the inlet where it attaches to the headpipe (you may need to move the clamp to see the whole number). Muffler body part numbers start with the pre-fix 027-XXXX (+4 more digits). Provide customer service with this number and we should be able to help you.