PDA

View Full Version : HD SE 65115-98 question about the 'core'



dmdrider03
05-23-2008, 06:01 PM
I have a set of Screaming Eagle 65115-98 slipons. I understand they were manufactured by SuperTrapp.
I removed my turnout end cap to repair a dent incurred and was surprised that the inner core was loose. I was able to pull the core out at least 4 inches. They were tight when I installed these slipons (new) approximately 1200 miles ago.
Is this the design of this pipe? Core slips in and is held in by the end cap screws?
If not, what are my options for repair
Thanks

bschultz
05-27-2008, 10:20 AM
This is the design of the pipe/core assembly.