PDA

View Full Version : Another Question about Kerker Exhaust part number



Vibaldpypeevalp
06-18-2012, 01:06 AM
I have a set of Kerker exhaust/mufflers 2:1:2 crossover system that I bought used. I do not have any mounting brackets to mount them to my 96 FLSTC and trying to locate some. The only part number I could find came from the crossover pipe with the numbers 050-7281. Any information is deeply appreciated.

bschultz
06-18-2012, 08:05 AM
The referenced headpipe, P/N 050-7281, was used in several '86-96 Softail systems (including a HD Screaming Eagle pipe), most discontinued. This headpipe is still used in system P/N 128-78082 and instructions can be see via PDF at the website.
For a hardware kit, which includes support tubes (mounting brackets) contact our Customer Service Department.

Vibaldpypeevalp
06-18-2012, 10:48 AM
Thank so much, now I know where to find what I need to put them on.:D

Where can I find the PDF? I just can't find it on the page.

bschultz
06-18-2012, 11:57 AM
Click on the red part number on the Kerker "slip-on/system" page.

Vibaldpypeevalp
06-30-2012, 07:06 AM
The referenced headpipe, P/N 050-7281, was used in several '86-96 Softail systems (including a HD Screaming Eagle pipe), most discontinued. This headpipe is still used in system P/N 128-78082 and instructions can be see via PDF at the website.
For a hardware kit, which includes support tubes (mounting brackets) contact our Customer Service Department.



My mufflers turned out to be hollowed Kerker Cans, can you lead me to a set of good baffles with tone? My information is in the qoute above. The length of the m8uffler is 20" and Diam. of 3.5" with 3 bolt pattern.

bschultz
07-02-2012, 07:09 AM
The replacement core assembley is P/N 100-7081 (includes packing).