PDA

View Full Version : Installation help.



widowmaker
12-12-2007, 09:14 AM
I recently purchased part# 828-71576 for my 07 Roadglide. I am having trouble getting the headpipe to go on the bike. I hope I don't have a pipe for 06 and earlier. There is not enough room to get past the jugs. Any insight would be appreciated. Are the 06 and 07 different other than the 02 sensors? Thanks.

bschultz
12-12-2007, 01:52 PM
The headpipes are the same bend and dimensions for the pre/post '07 touring models. The only difference being the o2 bungs. The headpipe should be stamped at the end of the collector with P/N 050-7157.
Try putting the front pipe up to the port with the flange, then the rear pipe up to the rear port (flange backed off until pipe in port, then slide flange into place).