PDA

View Full Version : 2011 flh



culleniii
12-02-2010, 02:14 PM
Will the 128-65115 SE that I have on my 2008 FLH work on the 2011 FLH.
I see that you have a different number for the 10 -11 models.

Thanks

bschultz
12-02-2010, 02:28 PM
They will work; however sound level will be near stock…hence the reason for the ’10-11 designation which has a freer flowing core resulting in more sound due to the catalyst in the headpipe.

jeff
12-02-2010, 04:52 PM
I put baffles from the 128-65117's in my 65115's and they sound much better, not loud but deep and rich. Baffle part number is 041-6517

culleniii
12-02-2010, 09:02 PM
Thanks for the info--I just ordered set of the new pipes--also i was informed that the stage 1 download and screaming eagle air filter was not needed. The 2011 would run fine.

bschultz
12-03-2010, 07:08 AM
That is correct.

culleniii
12-11-2010, 12:45 PM
I just installed the 117 on the 2011, everything went fine, except the right side pipe is a sch from rubbing a bolt just below the shock. Harley stock had a indent for this , is this ok to leave this way.

p.s the welded nuts on the bottom are nice.

bschultz
12-13-2010, 07:03 AM
Yes, they should be fine. The OEM mufflers have a larger diameter requiring the "dent" for clearance.