PDA

View Full Version : Too hot on RZR



roosterthomas
07-19-2010, 10:30 AM
I need some help fellas, please. I've got a 2010 RZR that I put a Mudslinger on and the pipe gets so hot when we ride. I'm afraid it will melt the plastics. Anyone experience this and come up with a solution? Thanks for your help!!
Rusty

bschultz
07-20-2010, 08:40 AM
Are you running with or without the spark arrestor insert?

roosterthomas
07-22-2010, 11:52 AM
Without, I took it out before install.

roosterthomas
07-22-2010, 01:32 PM
I took the bed off and added a piece of alum diamond plate to the frame just over the pipe. That has helped alot with the bed heating up. I wonder though, is there a possibilty of engine damage if I continue using the exhaust.

bschultz
07-22-2010, 03:58 PM
With the spark arrestor insert removed it may be running to lean. Yes, engine damage can occur from running lean.
Replacing the insert should resolve the issue. If it does, and you still want to run with out the insert, you need to look into a fuel management system.

roosterthomas
07-22-2010, 06:35 PM
Thank you kind sir!