PDA

View Full Version : Screws and Core



leanpop
05-18-2010, 05:56 PM
I have an '02 FLSTC with a Supermeg 2:1 system. I believe it's 828-71454

I just removed the screws to add some discs, after some engine work, and they all seem to have gotten a bit mangled. The threads on them seem to be worn down. Also, one of the threaded inserts seems to be messed up, because the one screw that is in fine shape won't start more than one turn in it, before it refuses to go any further.

I'm going to order some replacement screws. I'm wondering what pitch and size they are, so I can try and borrow a tap from someone to run through this insert.

If the insert can't be saved, is it part of the replacment core, 100-7093.

Thanks,
Leanpop

bschultz
05-19-2010, 08:03 AM
The screws are Stainless with a common 10-24 pitch. P/N 100-7093 is the correct replacement core (w/packing) for the system P/N 828-71454.